Handbook Of Model Rocketry

Another quest that proved a slightly more challenging than anticipated was my aspiration to find those editions of G. Harry Stine's Handbook Of Model Rocketry that my enthusiastically completist mind perceived as still dreadfully missing.

I first purchased the Handbook in its fourth edition in 1976 or 1977, and the latest, seventh edition is still readily available at the time I am writing this. We were utterly excited - rightly so! - about the Handbook when we first received it, and I thus also purchased any subsequent editions throughout the years. But obtaining the earlier and therefore historically rather fascinating editions was near impossible from Switzerland before the advent of the internet. And, as I found out, it can at times be somewhat difficult even today.

While I eventually found a copy of the second edition in decent condition, it was due to the extremely generous efforts by American collector Steve Kristal that I was able to complete the long-coveted line-up of books by adding the first and third editions. Needless to say, I am deeply grateful for such kindness.

For somebody who has been fascinated by model rocketry for most of my life, this means a lot. G. Harry Stine's Handbooks are not mere collector's items to me; it is still quite fascinating to read them, and the information therein has aged quite well. These books are like a time machine to an era when model rocketry lived through a golden age.

The photo above thus shows all the editions in chronological order. Top row, from left: Handbook Of Model Rocketry, original edition, Follett Publishing Company, Chicago, 1965; second edition, Follett Publishing Company, Chicago, 1967; third edition, Follett Publishing Company, Chicago, 1970; my original copy of the fourth edition as purchased when I was a teenager, Follett Publishing Company, Chicago, 1976.

Bottom row, from left: fifth edition, Prentice Hall Press, New York, 1987; sixth edition, John Wiley & Sons, Inc., New York, 1994; seventh edition (with Bill Stine), John Wiley & Sons, Inc., New Jersey, 2004.

Enerjet 1340/20

In my posts on this blog, I frequently alluded to how mythical Enerjet and that company's products appeared to us teenagers in mid-1970s Switzerland. At the same time, it was often difficult for us to find sufficient and reliable information about developments in our field of interest. We had to rely on issues of Model Rocketeer magazine, sporadic glimpses offered in company periodicals such as the Rocket Times or Model Rocket News. Or we deducted as much as we could from photos and text published in G. Harry Stine's Handbook Of Model Rocketry or Centuri's Model Rocket Design Manual, among others.

Congruent with our increasing skill in building and flying model rockets, we coveted any possibility to accomplish more advanced concepts and obtain motors with increased power. In the second half of the 1970s, when we became increasingly immersed in rocketry, Enerjet no longer existed, and it is very doubtful if any of Enerjet's products ever even made it to Switzerland while the company traded. We eventually found some solace when it became possible to obtain Flight Systems' products through a distributor in Germany, and we duly moved up a notch, both in motor power and materials.

But one of the rockets that always exerted an iconic radiance on me was Enerjet's 1340/20 payload rocket, first seen by us on page 231 of the fourth edition of the Handbook Of Model Rocketry, in 1976. Although I knew next to nothing about this rocket at the time, it became one of those designs that has never ceased to fascinate me in the 41 years since.

After Enerjet's demise, parent company Centuri continued to offer a number of components that were part of some of the former's most notable rockets. Among them were the #13 plastic fin unit (prod. no. F-413L), used by Enerjet's 1340 and 1340/20 designs and later part of Centuri's Phoenix Bird and Argos "Kwik Kits". Or the transition section and nose cone of the payload section of Enerjet's 1340/20, later offered in the guise of an egg capsule (prod. no. PNC-13E/ST-202), for example in Centuri's Rocket Times in fall of 1975 (a supplement to Centuri catalogue no. 761). And following the merger of Centuri and Estes, these parts occasionally reappeared as part of Estes kits, such as the Eliminator (the fin unit) or Eggspress (payload section).

Nonetheless, obtaining these parts to construct an Enerjet 1340/20 replica in the present day proved somewhat challenging, in spite of their sporadic availability and modern procurement tools such as the internet and eBay. Another surprise was the material used for the 1340/20's transition section and nose cone in their most recent guise as the egg capsule of the Eggspress. Instead of the more common, glueable high-impact styrene used for most nose cones, the plastic used for these parts is reminiscent of cheap garden toys for children, as usually imported from Asia, i.e., polyethylene. This flexible plastic is difficult to sand (and sanding is unavoidable due to the age of the original moulds), glue, and paint. I suppose this material was chosen due to its ability to absorb impacts without cracking.

The styrene plastic fin unit, on the other hand, appears to be entirely unchanged from the one I owned as part of my Centuri Phoenix Bird in 1978. The only difference is the colour in which it is moulded. As I was beginning to run low on original Enerjet waterslide decals, I had Wessex Transfers in Australia print me some replica decals.

Enerjet logo and Enerjet 1340/20 brochure sample page © by Enerjet Inc., Phoenix/AZ, USA.

Homage To Model Missiles, Inc.

I scratch-built this semi scale Aerojet-General Aerobee-Hi in 1986, using Centuri parts. It was an homage of sorts to the beginnings of our hobby and thus to some of the protagonists that had inspired me during my youth, ten years earlier: Orville H. Carlisle and G. Harry Stine.

As described, for example, in a fantastic article titled The First Model Rocket Kits, authored by G. Harry Stine and published on pages 5 to 9 of the February 1978 issue of Model Rocketeer magazine, Carlisle and Stine's Model Missiles, Inc. produced the Aerobee-Hi as the company's first proper model rocket kit in 1958. Moreover, I also admired the early Aerobee-Hi model rockets when I obtained what was my first copy of the Handbook Of Model Rocketry (Fourth Edition) in 1976 or 1977, such as in the formidable launch photo on page 125. We were model rocket obsessed teenagers at the time and not only glorified G. Harry Stine but also the beautifully pure design of the Aerobee-Hi rocket.

My own Aerobee-Hi was first launched on May 28, 1999, many years after I had originally completed it. The top photo shows the final preparations for this maiden flight, conducted with an Estes B6-4 motor in northeast Switzerland. As can be expected for such an immaculate design, it performed flawlessly. The lower two photos show the same rocket in May 2016, in Zurich, Switzerland.